Scissor & Craft Tool Caddy

So here's the dilemma - I have these scissors lots of scissors! Sewing, non-fabric, pinking shears, scrapbooking... And then there's the tools, pliers, wire cutters, wire curlers, a pattern notch cutter... You have that same dilemma too, right?

I needed something to keep them in that was portable, so if I was hand sewing or beading at my work table I could just place them there with me, and yet keep them organized and out of the way when I wasn't using them. So here's what I came up with.

A vast improvement from what I started with.

I know... Crazy!, right?

I started with my scissor assortment, laying out the various sizes. My sewing scissors were the longest. The scrapbooking scissors are shorter, but thicker. 

I made sure the box I selected was taller than my longest pair.

Then decided on the size of the hold that needed, so I measured them at the base of the handle. Then measured out a piece of paper the size of the box.

I drew out a grid of one inch squares on the template, cut paper scraps roughly the size of the holes and placed them on the template to decide on the placement of the holes.

After cutting the holes in the template I used it to transfer the placement to the box itself, and using a craft knife I cut the holes.

 

As I cut the holes I decided I wanted to reinforce it, so I used my template to cut a piece of corrugated plastic that I had the same size as the box. (That stuff's great for purse bottoms too. Collect them after the election, they're abundant and best of all, FREE!)

I cut the corrugated plastic large enough that it fit snugly inside the box, then cut the holes in it using the craft knife.
                   
I tested the caddy before I started covering it just to make sure it would work as I had envisioned, (not all of my bright ideas do!).


I selected the fabric that I wanted to cover it with, measured it out big enough to cover the top and sides. I sewed a zigzag stitch around the edge, then turned it up sewed in a casing.

 I used a thin cord that had as a draw string, put the box in it and pulled it tight to gather the fabric up around what would be the bottom of the caddy.

                                           

Now, how to get the holes in the fabric? I couldn't just simply cut the fabric. I considered doing that and using some Stop Fray on it to prevent unraveling, but decided a better solution would be to sew a button hole at each spot. To do that, I placed the template on the top of the box with the fabric in place and hand sewed an X at each spot with contrasting thread.

  

Once the buttonholes were in and clipped. I permanently tied off the draw string on the bottom. I removed the contrasting thread X's, what I could anyway, you can see small pieces of it were left behind. I probably should have used all white, as the remnants of wouldn't be so noticeable.

 I also added some scalloped ribbon trim to dress it up. (I just whip stitched it in place.)  It holds all of my scissors, craft tools and even my magnifying glass.

 I can just move the whole thing to my work table so if I'm beading or whatever I'm working on I have whatever tool I need at my finger tips without searching around or digging through a pile. 

It freed up space on my little tray. So I could better organize it too. I had this cute vintage green container that held the monster buttonhole attachment to my Grandmother's old Singer. I decided it was the perfect little storage container  for my sewing room. I removed the attachment that it held and filled it with marking pens, awl, screw driver, my measuring stick and other implements of construction. 

What organizing problems have you tackled? I'd love to hear your ideas and solutions.

Thanks for stopping by! :) 

Linking up at Debbie-Doos and other fun parties listed on my Link Party page. Come by and join in!

Christmas Sleighs

I've been blog absent for a long time. Between working 60-70 hours a week and getting ready for Christmas, it hasn't left much time for anything else. Even though I haven't been able to post anything, I haven't completely forgotten about my blog. I've been taking pictures and have lots of blog posts to put up. I wanted to get this one up, in case it might inspire some of you to do something similar while you still have time. I made something like these years ago, but this time I decided to challenge myself to see if I could do it on the cheap with all of my components coming from thrift and dollar stores. 

I completed the challenge by creating two fun and festive center pieces at a fraction of the cost from my previous versions.

I started in early November watching the thrift stores for just the right sleigh basket. The ones I made in the past were wicker. I found this wire one at a Goodwill and paid a little more than I wanted, $3, but I had been looking for sometime and it was the right size at 15" long and in good condition, so I went ahead and bought it. I found a smaller wicker and metal version at a much better price since it was in my Mother-in-Law's basement making it free. (Yay Free!!)

While I was watching the thrift stores for sleigh baskets, I was buying up festive bobbles, picks, sprigs and candles. I actually found one big bag of misc stuff for $1.40 at one shop.

At another I found a bag with two short pillars and a nutcracker candle still wrapped in cellophane, never used, for $2.00.

I hit the Dollar Tree for the clear plastic bowl that I needed for the wire sleigh and a bag of Potpourri so they would smell AND look pretty.

With all of the components finally gathered I spread them all out on my work surface and started putting them together. I started with the wire one, since it was bigger. I knew I wanted the silk flowers standing up in the back, so I cut a piece of the floral foam that I had to the right size and wrapped it in aluminum foil since it would show through the sides. With the poinsettias inserted in the back piece of foam I added the bowl to the body of the sleigh, wrapped another piece of foam in foil and inserted cinnamon sticks at the four corners. I poured the potpourri into the bowl around the block of foam and placed one of the pillar candles on top of that foam piece.

Then I filled it in with some of the little sprigs and sprays that came from that mixed bag that I bought at the one thrift store. I added straight pins and secured them into the foam under the candle where I needed.

Of course the candles not for burning, but it adds a pretty festive touch, don't you think?

For the smaller sleigh I decided my nutcracker candle should be the driver so I positioned the remaining piece of floral foam in the basket, carved out a small section for him to rest in and set pins around the parameter to so he wouldn't topple out too easy. I poured the rest of the potpourri around the foam and added more sprigs and sprays to fill in. I decided it needed some height so I added the golden berries at the back.
 

I have about $5.00 cost in each which is pretty cheap for large, floral, fragrant centerpieces. They were really fun to do and came together really fast. And I must admit, the best part was in the hunt for all the pieces in the thrift stores! I'll have to keep my eyes open for another sleigh. I think I have enough of the decorative bits for one more. Potpourri and flower foam is easy enough to come by if I find the right vessel to make one more.

Thanks for stopping by!

I'm linking up at Debbiedoo's  , Home Stories AtoZ and other fun parties listed on my Link Party page. See you there!

Sewing Machine Cover

I've been meaning to make a sewing machine cover for some time now. When I won the Amy Butler fabric from Flamingo Toes I considered making one with some of that, but before I made my final decision I went through my fabric stash and rediscovered this really cool retro apron. I should have taken a picture of it when I started so you could see the "before". It was in really bad disrepair. There was a hole in one corner and the tie was ripped. I could just never bring myself to toss it because it was just so darn cute despite it's poor condition.


I always thought I might find a project for it that wouldn't stress it too much. I tossed it in a lingerie net bag and washed it on gentle and was super careful ironing it once it was dry. I had to piece the back section with the ironing woman fending off her man with the steaming iron. I cut the phrase in a separate piece and made a pocket with it. 

Plain white cotton for the sides, top and back. And now I have another reason to smile when I walk into my sewing room!

Maybe I'll tackle the ironing board cover next!


Have you made a cover for your sewing machine?


I'm joining DebbieDoo's and Fox Hollow Cottage Pin the Tail on the Bloggy. You should join us for the fun!

Organizing Ribbons & Fabric

I've already posted about how I organized my beads, and my sewing patterns. Today I tackled my ribbons and fabric. 

Here are my "after" pictures. I recently read a post by Tiffany at Making the World Cuter, and she said you should start with the best pictures on a blog post. And since I'm still learning, I'll take free advice, especially from seasoned bloggers.


So let's start back at the beginning. This is what my ribbon mess stash used to look like.

Remember that roll of wallpaper that I scored from my mother-in-law's basement? I've already used it to make beads, sewing pattern envelopes, and covered a box to store my patterns in. We can now add ribbon organization to the many uses of the roll of paper. I started out with Oatmeal containers. 

 I had one scrap left from one of the other projects that was large enough for one of the small containers.

I marked out what I needed and cut the paper for covering with a glue stick. (I had previously figured out that school glue didn't stick to this textured wallpaper.)

I knew I wanted a slot in the oats container so I measured and marked it out down one side.

I don't have an X-acto knife. I'm really clumsy and think it would only be a matter of time before I lopped off something unintentional... not to mention painful and messy, so I opted for a serrated steak knife. To aid in cutting the slot I used my trusty sewing awl, (still haven't found a use for it in sewing!), to punch some holes along the cutting lines to serve as a sort of perforation. If you're brave enough to use an X-acto knife you could probably skip this step. 

 With the opening cut down the side of the container, it was time to get the paper ready for gluing. I made two cuts so the part that would have been over the slot would fold to the inside.

 Changing the subject.. have you made pattern weights? Mine are three washers glued together with E-6000 glue. They are the best thing ever!!! I use mine all the time!


So here's the first one all glued down and clamped till the glue takes hold.

 I realized I needed a longer piece for the inside. That first one gave me a little trouble, so on the next ones I made the cuts more generous.

I have a much longer tab here than I had on the last one. I also curled those center tabs the opposite direction from the way they wanted to go, so once inside they would follow the interior curve of the container.

 Here's one all glued, set, and filled with ribbon spools.

 Here's the final product. I can see all of my ribbons at a glance without digging through that messy pile. Much Better!

On to the fabric!

 My fabric stash was getting out of control, so Mr. ShowMe brought a couple of shelving racks up out of the basement for me. The ends of the racks were open so I wove some twine back and forth across the ends and tied it off so the fabric wouldn't fall out.
We drink a LOT of Diet Coke, so I cut apart 12 can cartons to make bolts to wrap the folded fabric around. I cut tall ones (14") for the back of the shelf and shorter ones (8") for the short stacks in front.

I used that system for the top two shelves. The very top of the rack holds shallow tubs for smaller pieces of fabric, fat quarters and the like.

The bottom shelf has some larger pieces that didn't lend themselves to the bolt system, like vintage drapery panels. 

I have one shelf finished. I'm still working on the other. Once I get them both done I'll probably do some color groupings, but for now, I'm just trying to get everything bolted and in place on the shelves.

What organization challenges have you conquered with your craft supplies? I'd love to hear about it!


Thanks for stopping by :)